Robusno neizrazito prilagođavanje pojačanja RST regulatora za WECS dvostruko napajani asinkroni generator

This paper proposes a new robust fuzzy gain scheduling of RST controller for a Wind Energy Conversion System (WECS) based on a doubly fed induction generator (DFIG). First, a designed fuzzy gain scheduling of RST controller is investigated, in which fuzzy rules are utilized on-line to adapt the RST controller parameters based on the error and its first time derivative. The aim of the work is to apply and compare the dynamic performances of two types of controllers (namely, Polynomial RST and Fuzzy-RST) for the WECS. A vector control with stator flux orientation of the DFIG is also presented in order to achieve control of active and reactive power of the wind turbine transmitted to the grid and to make the wind turbine adaptable to different constraints. The results obtained by simulation prove the effectiveness of the proposed controller in terms of decoupling, robustness and dynamic performance for different operating conditions.U radu je predloženo novo robusno prilagođavanje pojačanja RST regulatora za sustav za pretvorbu energije vjetra (WECS) s dvostruko napajanim asinkronim generatorom (DFIG). Prije svega istražena je sinteza neizrazitog prilagođavanja pojačanja RST regulatora u kojem su neizrazita pravila iskorištena on-line za adaptaciju parametara RST regulatora koji koristi signal pogreške i njegovu prvu vremensku derivaciju. Cilj rada primjena je i usporedba dinamičkih svojstava dva tipa regulatora (polinomski RST i neizraziti RST) za WECS. Također je prikazano vektorsko upravljanje s orijentacijom statorskog toka DFIG-a za postizanje upravljanja aktivnom i reaktivnom snagom vjetroagregata koja se predaje mreži te za prilagodbu vjetroagregata za različita ograničenja. Rezultati prikupljeni provedenim simulacijama pokazuju efektivnost predloženog regulatora kroz rasrpegnutost, robusnost i dinamičke performanse za različite uvjete rada

Power Control of Wind Turbine Based on Fuzzy Sliding-Mode Control

This paper presents the study of a variable speed wind energy conversion system (WECS) using a Wound Field Synchronous Generator (WFSG) based on a Fuzzy sliding mode control (FSMC) applied to achieve control of active and reactive powers exchanged between the stator of the WFSG and the grid to ensure a Maximum Power Point Tracking (MPPT) of a wind energy conversion system. However the principal drawback of the sliding mode, is the chattering effect which characterized by torque ripple, this phenomena is undesirable and harmful for the machines, it generates noises and additional forces of torsion on the machine shaft. A direct fuzzy logic controller is designed and the sliding mode controller is added to compensate the fuzzy approximation errors. The simulation results clearly indicate the effectiveness and validity of the proposed method, in terms of convergence, time and precision

Second-Order Sliding Mode Control of Wind Turbines to Enhance the Fault-Ride Through Capability Under Unbalanced Grid Faults

© 2021 John Wiley & Sons, Ltd. This is the accepted manuscript version of an article which has been published in final form at https://doi.org/10.1002/cta.3023The integration of wind generation to the grid is growing rapidly across the world. As a result, grid operators have introduced the so-called grid codes (GC), which nowadays include a range of technical conditions and requirements, which wind generators must fulfill. Among these, the low voltage ride through (LVRT) is a requirement for wind turbines to stay connected to the grid and continue to operate during the disturbance. In this study, a control structure, combining inertial kinetic energy storage with a crowbar circuit, is proposed to enhance the ride-through capability of a wind turbine generator (WTG) based on a wound-field synchronous generator (WFSG) under unsymmetrical voltage dips. For the grid-side converter (GSC), a decoupled double synchronous reference frame (DDSRF) d-q current controller is used. Furthermore, a Second-Order Sliding Mode Controller (SOSMC) with Super-twisting (ST) algorithm is proposed for the GSC and the machine-side converter (MSC) to improve the response speed and achieve an accurate regulation of the dq-axis current components simultaneously. The main objectives of the GSC are to achieve a balanced, sinusoidal current and smooth the real and reactive powers to reduce the influence of the negative sequence voltage. A series of simulations are presented to demonstrate the effectiveness of the proposed control scheme in improving the LVRT capability of the WFSG-driven wind turbine and the power quality of the system under unbalanced grid voltage conditions.Peer reviewe